Semi-auto Round Bottle labeling Machine MT-50W: Maintenance & FAQ

Each day, before starting the machine, users need to: 1. Check if there is any sundry on the labeling soft roller, label pulling soft roller, guide rod, stripping plate etc. 2. Check if power is OK and if power cord is damaged. 3. Be sure to turn off the power before going off work every day, and after confirming the machine is powered off, uses also need to:
Friday, July 19, 2019

Semi-auto Round Bottle labeling Machine MT-50W: Operation & Precautions

After setting all relevant parameters and completing debugging, turn on power. Place the bottle in between the bottle supporting roller and labeling soft roller, with the bottom of the bottle against the catch pin. pull down the bottle pressing swinging arm, so that the bottle pressing roller press against the bottle to be labeled; by then the lower end of the swinging arm pushes the microswitch to turns it on, and them signal is transferred to the control module which drives the label pulling motor to rotate.
Thursday, July 18, 2019

Semi-auto Round Bottle labeling Machine MT-50W: Installation & test

Loosen two fastening screws below the bottle supporting stand (3). Adjust and move the bottle supporting stand (3) according to the diameter of the bottle to be labeled to make the bottle between the bottle supporting roller (2) and labeling soft roller (9). The bigger the bottle diameter is, the larger the distance between the two rollers will be. Fasten the screws when the distance is appropriate.
Wednesday, July 17, 2019

Semi-auto Round Bottle labeling Machine MT-50W: Introduction & Detail diagram

MT-50W Semi-auto Round Bottle labeling Machine is an ideal semiautomatic labeling device for labelling on cylindrical product, such as round bottle, and it is widely used in daily Chemical, food and beverage, medicine, chemical industry and other light industries.
Monday, July 15, 2019

How to deal with common faults in labeling machines? Ⅱ

Since there would be a lot of unexpectable faults occure in the operation of labeling machine, we 'd like to get suggestions from our customers to further upgrade the equipments. Here we provide some common breakdowns and settlements about labeling machines.
Thursday, July 11, 2019

How to deal with common faults in labeling machines?

In recent years, the types of labeling machines are gradually increasing, and the skill level has also been greatly improved. If the label does not adhere properly to the bottle, it will increase cost and reduce productivity. In general, the common faults of the labeling machine are blistering, wrinkles, incorrect label position, and label detachment, etc.
Thursday, July 4, 2019

Round bottle labeling machine maintenance

The automatic round bottle labeling machine can meet the needs of full-circle labeling or semi-circle labeling of round bottles. The applicable labels generally include self-adhesive labels, self-adhesive films, electronic supervision codes, and barcodes. This kind of equipment is often used for round bottle labeling in food, medicine, cosmetics, daily chemicals, electronics, hardware, plastics and other industries.
Thursday, June 20, 2019

Working Principle of Labeling Machine

The labeling machine is a device for attaching a roll of self-adhesive paper label or other suitable material to a PCB, a product or a prescribed package, and is widely used in various industries such as electronics, furniture, beverage, daily chemical, food, medicine, petrochemical, etc. Labeling of product packaging containers and packaging boxes.
Thursday, June 6, 2019

Major Types of Labeling Machines and Their Applications

Let's check out some of the major types of labeling machines: manual, semi-automatic, automatic, side, top & bottom, Wrap-around, and corner wrap.
Thursday, May 23, 2019