Put the unsealed soft pipe on the sealing glide and push it to the heater, which hold together automatically to pre-heat the rear of the soft pipe and separate until the heating reaches a necessary time and temperature. Push the second mold, which is leaning against the first one, onto the glide to the clips when the sealing point at the first pipe is about to melt. Pre-heat the pipe between the clips before they fold again after the first operation.

Thanks for choosing DF-20 series soft-pipe sealer. This sealer applies to toothpaste-shaped pipe of plastic and compound plastic material with diameters range from 8mm to 55mm, and length range from 60mm to 220mm.