Auger Powder Filling Machine HZF-C Precautions

Start mixing when loading, avoiding the occurrence of materials on one side and less on one side, and distributing evenly in the hopper. You must follow the steps in the instruction manual when you first dispense. Otherwise, the filling accuracy and error correction cannot be performed or adjusted. Before the formal filling, let the machine start the next time, so that the screw inside the cup is full of materials.
Wednesday, September 18, 2019

Different Types of Filling Machines

The filling machine is mainly a small branch in the packaging machine. It can be divided into liquid filling machine, paste filling machine, powder filling machine and particle filling machine from the perspective of material packaging.
Wednesday, September 18, 2019

Auger Powder Filling Machine HZF-C: Inspection and adjustment

The parts of the equipment have been adjusted before leaving the factory. However, during transportation and handling, the fasteners may loosen and cause position changes. In addition, the relevant parts need to be adjusted when replacing the filling parts. And adjustments should be made to the machine before the official use:
Tuesday, September 17, 2019

Bottle Capping Machine Classification

The emergence of the capping machine has driven the rapid development of many industries. The development of the bottle capper is very fast, and it is widely used in food, pharmaceutical, and daily chemical industries.
Tuesday, September 17, 2019

Particle Filling Machine BFZZ: Troubleshooting Guide

Particle Filling Machine BFZZ provides pefect weighing and packaging solutions for grain, seeds, tea, etc. It isdesigned for quantitative dispensing of granular and powder materials.
Monday, September 16, 2019

Manual type Single Punch Tablet Press TDP-0 Introduction

The main body of this machine is the gantry-type made by carbon steel. The main spindle junction with the partial core gear and the cam. The rocker arm and the hand shank are on the right of the spindle. When turn the main spindle by manual, then it can cause the Partial core gear, cam, lifting poker, feeder to turn ,do different lifting movement.
Friday, September 13, 2019

Manual type Single Punch Tablet Press TDP-0 Descriptions

This machine is a manual type single punch tablet press machine. It can punches round tablets less than 12mm,this single press machine applicable to the pharmacy, chemical industry, food service, medical establishment or other places to apply.
Thursday, September 12, 2019

CDR-5A Capsule / Tablet Counting Machine: Troubleshooting Guide

Make your capsule couter work again based on your machine failure and troubleshooting guide. If you encounter problems that are not mentioned or cannot be solved, please contact a professional maintenance person to avoid further losses.
Thursday, September 12, 2019

Manual type Single Punch Tablet Press TDP-0 Operations

Set up the dies: At first demount the hopper, feeder, middle die plate, after that wash the middle die plate, die, hole of die, keep them dry and clean. Then according to the following steps:
Wednesday, September 11, 2019

CDR-5A Capsule / Tablet Counting Machine: Maintenance

CDR-5A Capsule / Tablet Counting Machine should be used in room temperature, and should not be used in high temperature, humid, acid and alkaline environment for a long time, so as not to affect the service life, efficiency and precision of the equipment.
Wednesday, September 11, 2019