This machine adopts programming control system, touch panel operation, stepless frequency conversion speed regulation, pneumatic joint control, and electronic automatic counting device, which can automatically complete the capsule positioning, separation, filling, locking and other actions. The filling dose is accurate and the operation is convenient. The body and work surface are made of stainless steel, and the product meets the requirements of GMP. It is suitable for capsule filling of powdered and granular medicines.
|Applicable capsules||00#,0#, 1#, 2#, 3#, 4#|
|Total power||4 kw|
|Vacuum Pump(evacuation rate)||40m3/h|
- Use external hexagon screws：more convenient to clean,solves the cross-contamination of materials.
- Use oxidized capsule tray: A protective film is added to the surface to enhance the corrosion resistance, surface hardness and wear resistance of the surface layer, prolong the service life of the grinding disc, and is easy to clean.
- The installation of the main power switch can directly cut off all work, without powering off to open the electrical box and then turn off the power.
- The position of the emergency stop button has been changed, you can reach out and touch it. It's easier to deal with in case of emergency.
- The discharge port is designed to be detachable, which solves the problem of difficult cleaning of material residues at the discharge port; a new mold tray rack is installed to make the operation of multiple trays more convenient.
- The width of the work surface reaches about 85 cm, which increases the safety distance
- The edge of the work surface has been changed from the original right angle to the rounded corner
- Locking operation time reduced from 18 seconds to 12 seconds
- The capsule feeding mechanism is moved from the machine table to below the machine table, which greatly reduces the operator's physical expenditure, and effectively relieves operator fatigue.
- Material recovery system reduces material waste and material recovery speed, and reduces environmental pollution to the entire workshop
- The domestic vacuum pump was upgraded to the vacuum pump of German Becker company
- The electrical box is equipped with a lash sensor, and the machine will automatically stop once the door of the electrical box is opened, which can better protect personal safety.
- The innovatively designed double-head full-automatic capsule feeding mechanism of the capsule feeding station doubles the capsule feeding speed. The machine can be equipped with double grinding discs, which can continuously feed capsules and fill materials, greatly improving production efficiency.
This machine is easy to operate and safe, cleaning is also very convenient!
From: Yirui | Date: 4/8/2022 1:27 AM
Write your own review
As an expert in the pharmaceutical and pharmaceutical packaging industry, iPharMachine has provided solutions for hundreds of pharmaceutical and health product manufacturers for 17 years. By visiting customers, we get good reviews from our customers.