Shopping cart (0)
You have no items in your shopping cart.

Herbs Grinding Machine & Micro Powder Mill Machine YF-150

Super grinder also names FDV, it is used for milling all kinds of dry materials like herb, Chinese herbal medicine, spices, grains, beans, peanuts, pearls and even the stone.

$168.99 USD


Automatic Herbs Grinder Machine also names Powder Milling Machine. Adopts top grade motor, mental fan blades, high rotating speed and high power makes the working life longer, can continue working for half an hour. It combines the functions of mini-mill pulverizer and grinder.

It is used for milling all kinds of dry materials like herb, Chinese herbal medicine, spices, grains, beans, peanuts, pearls and even the stone. The machine is suitable for processing and small batch production of materials in Chinese and Western medicine, food industry, chemical industry, scientific research institutions and other fields. It can also be used for medical research, cosmetics, internal medicine, surgery, ophthalmology and dermatology medicine.


  • High fineness and high speed – Driven by a motor, which ensure the fineness and speed. the pulverizing steels of the machine rotate at a high speed and pulverize materials by the impact and cutting among materials.
  • Small in size, light in weight, compact in structure – no vibration, so there is no need to fix the machine, which means that the machine can be used in any occasion.
  • Good safety performance, no dust, low loss, easy to clean – the pulverizing chamber of the machine is made of stainless steel and is full sealed structure.
  • Wide application – be suitable for pulverizing plant fiber and materials of high hardness and high toughness, such as Chinese medicine, inorganic materials, minerals etc.
  • Easy to operate -- can be turned on and off at any time, and the powder fineness can be controlled by operation time.
  • Safety switch – to ensure the operation safety.
  • Overload protector-- to prevent circuit from overloading and overheating.


Model YF150
Power supply AC110V 60Hz AC220V 50 Hz
Capacity 500 g (take rice as reference)
Load power 1600 W
Open method Open by hasp
Pulverizing chamber 304 stainless steel
Overload protector capacity 5A
Revolving speed 28000 r / min
Powder finess 60-300 mesh
Overall size 240*190*380mm
Cross weight 7 kg
Pulverizing time 5 min

Detail diagram

1.Handle 2.Upper cover 3.Pulverizing chamber
4.Adjusting nut 5.Machine body (motor included) 6.Carbon brush hole
7.Anti-skid foot pad 8.Hasp 9.Safety switch
10.Bearing bracket 11.Indicator 12.Timing switch
13.Overload protector 14.Stand 15.Pulverizing blades (3 sets)
16.Fastening nut 17.Filter


Before operation, please turn off the power switch.

1. Counterclockwise open the upper cover (2).

2. Put dry materials into the pulverizing chamber (3).

3. Close the upper cover (2) with the hasp (8).

4. Plug in the power, the indicator (10) lights, turn on the timing switch (11) and set for required time.

5. When the rolling sound of the material is relatively uniform, materials have been pulverized into powder, and then turn off the machine.

6. Open the upper cover (2), loosen the adjusting nut (4), tilt the machine body and pour out the powder.


Q: How to How to eliminate the odor of the pulverizing chamber?

A: All the pulverizing chamber are formed through stretch processing. During this process, lubricating oil are required to ensure the lubrication. So new arrival machines will inevitably remain a little smell. Please use rice to pulverize for 1-3 times after receiving a new machine, and then wipe it with a wet towel. After that, the peculiar smell will be basically eliminated.

Q: There is a screen inside the pulverizing chamber, what is it used for?

A: The screen is a gift from us. If you need to pulverize for powders especially fine, you can use this screen for screening after pulverizing. Please take out the screen after you receive the machine. The screen cannot be inside the pulverizing chamber during operation.

Q: Materials that are not allowed to be pulverized by the machine?

A: Moist, fresh or soft materials, any material with water is not allowed to be pulverized by the machine, such as fruit, meat and vegetables.

Q: Usually, what materials can be pulverized by the machine??

A: Materials to be pulverized are required to be definitely dry.

Medicinal materials——Dendrobium candidum, Gastrodia tuber, Pueraria root, Anemarrhena, White Atractylodes Rhizome, Fleeceflower root, Tortoise Plastron etc.

Grain——rice, millet, glutinous millet, corn, black rice, soybean, mung bean, red bean, black bean etc.

Tonic——white fungus, Wolfberry Fruit, donkey hide gelatin, Ginseng, Notoginseng, Red Sage Root, Cordyceps, Pilose Antler etc.

Seasoning——aniseed, wild pepper, orange peel, dried chilli, Dahurian Angelica root, Fennel, licorice, Amomum fruit, Aucklandia root, etc.

Dried Fungus——Ganoderma lucidum, Poria, dried mushroom etc.

Pet feed——bird food, dog food, fish food.

Beauty material——pearl, homemade mask material, etc.

Commercial——pharmacies, perfumeries, hospitals, grocery stores, markets, poultry farmers etc.

Laboratory——minerals, soil, experimental materials etc.

(Note: the above is the classification based on grinding materials. Please refer to page 19-20 (grinding guide) to see how to grind these materials.)


Malfunction Cause Remedy
Energized motor does not rotate The power plug is loosened or poor contacted Repair the power or replace the plug
The timing switch is poor contacted Replace with a new one
Overload protector is ejected Power off and remove all the materials inside and install the overload protector
Overload protector is damaged Replace with a new overload protector
The commutator (carbon brush) is damaged Replace with a new carbon brush
The upper cover is not well installed Re-install the upper cover
The safety switch is damaged or poor contacted Replace with a new one or adjust the safety switch
Energized motor rotates slowly or does not rotate Mechanical parts get stuck (There are foreign matters inside the pulverizing chamber) Remove foreign matters inside the pulverizing chamber, and rotate the machine without materials for 30 sec
The supply voltage is too low Adjust the supply voltage
Motor casing surface is overheating Overloaded Remove some materials
The supply voltage is too low Adjust the supply voltage
There is a ring fire or large spark on commutator surface The surface of the commutator (carbon brush) is not smooth Clear debris on the commutator (carbon brush) surface