Check whether the whole machine stands stably before power-on, whether the components are connected firmly, and whether the wires and plugs are damaged. Turn on the power cord and the power switch of the machine to make the inverter operation panel display 0.00. If you do not display 0.00, press the DSP repeatedly or rotate the adjustment knob FREQ SET counterclockwise.

The capsule separating machine is a new member of the capsule production equipment and it is a highly efficient small device for completely opening the capsule. It solves the irreversible problem of the capsule filling process perfectly.

In the preparation process of blister-packed medicines, some unqualified products may be generated due to batch coding, drug detection, etc. These unqualified drugs need to be removed from the blister package for recycling or destruction.

The reducing mechanism drives the barrel rotary, and the length of two barrels is different, which will produce asymmetry. And then the machine take advantage of this asymmetry for mixing materials. When the machine is running, materials from the decomposition to the combination, as potential energy differences, which will produce lateral force to promote the horizontal exchange of materials.

The machine utilizes the principle of biomimetics. The left and right AB mold plates are equipped with 100 movable swing arms. The capsules are sucked into the die holes of the die plate through the negative pressure of the fan, and are transferred to the cut points of the two plates, and are positioned by the limit steel pins. The swing arms of the two die plates respectively divide the cap and body of the capsule, and the die plate rotates to separate the capsules, and the caps and bodies of the capsules respectively come out from different blanking ports.

Self-adhesive labels are one of the most common labels in our daily lives. It can be applied to materials that are not suitable for general paper labels. Compared with other printed materials, it is quite different from the printing of traditional printed materials.

A ground wire must be used before the powder dosing machine is used. Please confirm whether the voltage is consistent with the specifications of the machine before use. If the power cord, plug or other parts are found to be damaged, they must be stopped. Please replace and repair them with professional personnel to avoid injury.

Now the labeling machine has covered all areas of our life, food, medicine, cosmetics and other industries. Visible labels have a huge role in our lives. After the product is labeled by the labeling machine, the corresponding product information of the consumer can be provided.

Start mixing when loading, avoiding the occurrence of materials on one side and less on one side, and distributing evenly in the hopper. You must follow the steps in the instruction manual when you first dispense. Otherwise, the filling accuracy and error correction cannot be performed or adjusted. Before the formal filling, let the machine start the next time, so that the screw inside the cup is full of materials.

The filling machine is mainly a small branch in the packaging machine. It can be divided into liquid filling machine, paste filling machine, powder filling machine and particle filling machine from the perspective of material packaging.