Since there would be a lot of unexpectable faults occure in the operation of labeling machine, we 'd like to get suggestions from our customers to further upgrade the equipments. Here we provide some common breakdowns and settlements about labeling machines.
|Machine is not running.
||Electrical breakdown.||Check the contact of fuse, all the parts and the external power supply.|
|Control failure of the bottle inspection signal.||Check the contact points and replace.|
|Tape is not moving.||Control failure of the bottle inspection signal.||Check the contact points and replace.|
|Tape pressing wheel becomes loose.||Press the tape pressing wheel tight.|
|Label tape breaks.||Micro pressure block is too tight.||Adjust the micro pressure block.|
|Brake strap is too tight.||Adjust the brake strap.|
|Non-stop of the label tape.||Control failure of the label inspection signal.||Adjust the label inspection signal and replace.|
|Non-separation of the clutch.||Internal is too big or too small. Adjust till appropriate. Check the joints of the circuit.|
|Coding failure||Control failure of signal.||If the coding machine works normally after pressing down the inspection button, it indicates the breakdown of the signal line. Check the joints of the circuit.|
|For breakdowns of the coding machine please refer to the instructions for coding machine.|