Blog posts tagged with 'capsule polishing machine'

Capsule Polishing Machine needs regular cleaning to maintain its status. Use the gauze to clean the machine base and the transmission parts inside the machine with clear water or alcohol. Also clean the hopper, inlet, motor cover, top cabinet and lower slot with the same method.

Pour the filled capsules into the Capsule Polishing Machine hopper, and then the capsule is brought into the mesh cartridge by the rotating brush. In the mesh cartridge, the capsules are polished and dedusted by the brush. Defective capsules without capsule caps, and materials scattered from capsules are recovered by the vacuum cleaner.

YJP-III capsule polishing machine is used for capsule polishing, which can effectively remove the dust on the surface of the capsule to improve the smoothness and eliminate the static electricity. It is suitable for all capsules of different sizes.

Check all parts that come into contact with the product, such as polishing cylinders, brushes, etc., whether they are in a normal state; Replace the worn parts to make sure that the equipment is working properly; If necessary, check that all screws and nuts are tightened;

The capsule polisher and sorter is a common electric processing tool. But in capsule polishing procedure, there may occur some problems. In order to better operation, we have provided some solutions here.

The vertical capsule polishing machine can remove the dust on the surface of capsules and tablets and improve the surface finish. It is suitable for the production of various capsules and tablets. The metal parts in contact with the tablets are made of stainless steel 316L, and the sanitary conditions of the equipment are in compliance with GMP certification standards.

Check the following items before running: Check the machine parts, fasteners, and connecting screws for looseness; Verify that the wiring is correct and that the ground terminal is well grounded.

Capsule polishing machine is a special capsule polishing equipment, which can effectively remove the dust on the surface of the capsule to improve the smoothness and eliminate static electricity. It is suitable for all types of capsules.