Shopping cart (0)
You have no items in your shopping cart.
RSS

Mechanical Conveying and Pneumatic Conveying -Thursday, October 10, 2019
The powder conveyor is a specialized powder conveying mechanism specifically designed to move fine powder materials in manufacturing, storage or dispatching equipment. While powders can be transported using conventional belt conveyors, the reality of potential contamination such as environmental pollution, dust generation and explosion hazards often requires dedicated conveyors for these materials.
QVC Pneumatic Vacuum Conveying Common Problem -Friday, September 27, 2019
The loading machine can not be loaded or the loading ability is small. Please check the following procedure.
QVC Pneumatic Vacuum Conveying Maintenance -Wednesday, September 25, 2019
It is required to be room temperature, and it is not easy to use it in high temperature, humidity, acid and alkaline environment, so as not to affect the service life, efficiency and precision of the equipment.
When closing the oven door, the guide plate of drying trolly shall be folded to prevent it from being crushed by the door or door sea from being damaged; The equipment power supply shall be secured: 380V voltage, with the voltage difference no more than 10%; Insulating materials shall not be put under the oven to raise it off the ground;
Pilot production can be carried out after three or more times of debugging without malfunctions; Before pilot production, the oven shall be cleaned completely and the cleaning fluid shall not penetrated into the electrical components and the insulation material of the oven; After the cleanliness of all parts of the oven reaches the technological requirements, load material on the tray and it’s preferred to control the amount of material to cover 30mm of the tray;
In pharmacies because of different varieties and lot numbers vacuum feeders need to be cleaned out often. We have fully considered this requirement of the users when we design the pneumatic vacuum feeders. For cleanout the user only needs to do the following.
Fix the vacuum hopper of the pneumatic vacuum conveyor onto the hopper of sheet press or packing machine (or other machines) with a ring. In case that the vacuum hopper could not be directly fixed onto the hopper of the material-receiving machine a support could be made for fixing the vacuum hopper.
Pneumatic Vacuum Conveyor is a vacuum feeding machine by using pneumatic vacuum pump as vacuum source. With this vacuum feeder materials could be conveyed directly from container into mixer, reactor, silo, tablet machine, packing machine, vibration sieve, granulator, capsule filling machine, wet granulator, dry granulator and disintegrator. To use this feeder could lighten workers’ labor intensity, put an end to powder pollution and ensure that the production process meets GMP requirements.
If failed feeding or short feeding capacity occurs on the QVC-1 vacuum feeder, please check the feeder as the following procedure.
Vacuum loader is a vacuum conveying machine by using pneumatic vacuum pump as vacuum source. With the help of this vacuum loader, materials could be conveyed directly from container into mixer, tablet machine, packing machine, vibration sieve, granulator, capsule filling machine, granulator, disintegrator, etc. Using this machine could lighten workers’ labor intensity, put an end to powder pollution and ensure that the production process meets GMP requirements.